Depth limited to 4.5 meters?

[mmunaro]

Hi,

with commit 5086872, I could get depth up to 10 meters, while now (I tried with commit 3c0cda4) depth seems to be limited to about 4.5 meters.

Any idea why this happens or how to remove this limit as it was before?

Thanks!

Best,
Matteo

[christiankerl]

You can change the limits by instantiating one of the packet pipeline implementations, call getDepthPacketProcessor and then call its setConfiguration method. Pass your packet pipeline object to the openDevice method

[mmunaro]

Thanks for your quick reply.
I did this, but nothing changes:

libfreenect2::DepthPacketProcessor::Config config;
config.MaxDepth = 10000;
packetPipeline->getDepthPacketProcessor()->setConfiguration(config);
device = freenect2.openDevice(camSerial, packetPipeline);

Are these parameters really used?
It looks like these parameters are used instead:
https://github.com/OpenKinect/libfreenect2/blob/master/examples/protonect/src/depth_packet_processor.cpp#L42

[christiankerl]

Which pipeline are you using? I'm not sure whether the opencl one respects the parameters @wiedemeyer ?

[mmunaro]

Yes, I am using libfreenect2::OpenCLPacketPipeline

[kohrt]

Yes, it just uses the DepthPacketProcessor::Parameters and does not update the min and max distance based on the config. I will fix this and create a pull request.

[christiankerl]

@mmunaro please close this issue if the fix works for you

[mmunaro]

Yes, this fix works (if both MinDepth and MaxDepth are specified and if they are expressed in meters).

libfreenect2::DepthPacketProcessor::Config config;
config.MinDepth = 0.3f;
config.MaxDepth = 10.0f;
packetPipeline->getDepthPacketProcessor()->setConfiguration(config);
device = freenect2.openDevice(camSerial, packetPipeline);

[zardchim]

Sorry to raise this problem again. I pull the newest code, however when I set the config.MaxDepth to more than 4.5f, it shows "skipping depth packet", and no depth image shown. My code is as follow:

pipeline_1 = new libfreenect2::OpenCLPacketPipeline();

libfreenect2::DepthPacketProcessor::Config config;
config.MinDepth = 0.5f;
config.MaxDepth = 10.0f;
pipeline_1->getDepthPacketProcessor()->setConfiguration(config);

if (freenect2_1.enumerateDevices() == 0)
{
    std::cout << "Device 1 not connected" << std::endl;
    return -1;
}
std::string serial_1 = freenect2_1.getDeviceSerialNumber(0);
dev_1 = freenect2_1.openDevice(serial_1, pipeline_1);

Any idea why this happen?? Thank you!

Solution:
I don't know the reason, but it works after I let the program run about 5-6 seconds ( with tons of skipping depth frame".

[spium]

Hello,
it seems like the problem is not fully fixed yet. In fact, when building the OpenCL program in OpenCLDepthPacketProcessorImpl::buildProgram(), printing the build options shows that MinDepth and MaxDepth values do not change.
I found out that the issue is in OpenCLDepthPacketProcessor::setConfiguration(). When changing min and/or max depth, the OpenCL program is built BEFORE setting the config to the new values (impl_->config = config). Therefore, the build process still reads the old values.
The fix is to simply update the config before building the OpenCL program.

[floe]

Ah, this was probably introduced by #293 (/cc @HenningJ). Is it maybe sufficient if you just comment out line 614 in opencl_depth_packet_processor.cpp?

[spium]

I don't think so, otherwise the OpenCL program wouldn't be rebuilt at all and would still be running the old version with the old config. What I did was copy the last line in the method (impl_->config = config) inside the if body just before line 614. If you want I can submit a pull request with the fix, but it's so simple I don't think it's worth the effort.