ad9081/no-os: Add TBD for Console output - to check

ad9081: Set TBD as comments

Signed-off-by: Stanca Pop <[email protected]>

Author: StancaPop

docs/solutions/reference-designs/eval-ad9081/quickstart/a10soc.rst

@@ -685,5 +685,5 @@ To reboot the system, run:
 
 About the IIO devices
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-TBD
+..
+   TBD

docs/solutions/reference-designs/eval-ad9081/quickstart/index.rst

@@ -13,6 +13,7 @@ how to program the bitstream, run a no-OS program or boot a Linux distribution.
    On A10SoC <a10soc>
    On VCK190 <vck190>
    On ZC706 <zc706>
+   On VCU118 <vcu118>
    On ZCU102 <zcu102>
 
 .. _ad9081 carriers:

docs/solutions/reference-designs/eval-ad9081/quickstart/vck190.rst

@@ -875,4 +875,5 @@ To reboot the system, run:
 About the IIO devices
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-TBD
+..
+   TBD

docs/solutions/reference-designs/eval-ad9081/quickstart/zc706.rst

@@ -703,7 +703,8 @@ To reboot the system, run:
 About the IIO devices
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-TBD
+..
+   TBD
 
 Using no-OS as software
 -------------------------------------------------------------------------------
@@ -776,4 +777,6 @@ connected to the proper ttyUSB or COM port:
 
       Xilinx Zynq First Stage Boot Loader
 
+      TBD
+
 .. include:: ../../common/using-iio-osc.rst

docs/solutions/reference-designs/eval-ad9081/quickstart/zcu102.rst

@@ -1086,7 +1086,7 @@ Follow the steps in this order, to avoid damaging the components:
 #. Configure :xilinx:`ZCU102` for JTAG boot mode (mode SW6[4:1] switch in
    the position **ON,ON,ON,ON**)
 #. Connect USB UART J83 (Micro USB) to your host PC
-#. Connecy USB JTAG (Micro USB) to your host PC
+#. Connect USB JTAG (Micro USB) to your host PC
 #. (Optional) Connect a monitor to the FPGA by HDMI, and a mouse and a keyboard
 #. Turn on the power switch on the FPGA board
 #. Observe console output messages on your terminal (use the first ttyUSB or
@@ -1104,4 +1104,7 @@ connected to the proper ttyUSB or COM port:
 
       Xilinx Zynq MP First Stage Boot Loader
 
+..
+   TBD
+
 .. include:: ../../common/using-iio-osc.rst