Not booting from uSD card #43

oilcan-productions · 2023-04-10T17:18:39Z

oilcan-productions
Apr 10, 2023

Finally got around to install the riser board for the uSD card.
Created a new 16GB card with the latest image on it
system does not boot :(

ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT)
configsip: 188777542, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:4492
load:0x40078000,len:13324
ho 0 tail 12 room 4
load:0x40080400,len:3796
entry 0x40080624
I (354) psram: This chip is ESP32-PICO
I (354) spiram: Found 64MBit SPI RAM device
I (354) spiram: SPI RAM mode: flash 80m sram 80m
I (357) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (364) cpu_start: Pro cpu up.
I (368) cpu_start: Application information:
I (373) cpu_start: Project name:     imsaisim_esp32
I (378) cpu_start: App version:      v1.9.1
I (383) cpu_start: Compile time:     Sep  8 2021 15:28:40
I (389) cpu_start: ELF file SHA256:  8a0e39da91675446...
I (395) cpu_start: ESP-IDF:          v4.0.2-4-g877a28e05
I (401) cpu_start: Starting app cpu, entry point is 0x40081b58
I (0) cpu_start: App cpu up.
I (898) spiram: SPI SRAM memory test OK
I (962) heap_init: Initializing. RAM available for dynamic allocation:
I (962) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (964) heap_init: At 3FFC36F8 len 0001C908 (114 KiB): DRAM
I (970) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (976) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (983) heap_init: At 4009D62C len 000029D4 (10 KiB): IRAM
I (989) cpu_start: Pro cpu start user code
I (994) spiram: Adding pool of 3241K of external SPI memory to heap allocator
I (1014) spi_flash: detected chip: gd
I (1014) spi_flash: flash io: qio
I (1015) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1083) nvs: Reading settings from NVS
I (1084) nvs: settings = 00000956
I (1084) esp32_boot: Log Level set to INFO
I (1086) esp32_hardware: IMSAI Shell Running on Core#0
I (1572) esp32_hardware: CP-A Found - Power Switch 2
I (1572) esp32_hardware: DIP/MEM Switches: 00
I (1572) esp32_hardware: Initializing uSD card
I (1577) gpio: GPIO[13]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (1629) esp32_hardware: uSD card successfully detected and mounted with the following details:
Name: SA16G
Type: SDHC/SDXC
Speed: 40 MHz
Size: 14992MB
I (1632) esp32_hardware: Initialise UART1 to default configurtion
I (1639) esp32_update: Checking for image update package
I (1646) esp32_boot: OPENING BOOT.CONF
I (1651) esp32_boot: OPENED: /sdcard/imsai/conf/boot.conf
I (1657) esp32_boot: ENV: NTP_SERVER=pool.ntp.org
I (1661) esp32_boot: ENV: TZ=AEST-10AEDT,M10.1.0,M4.1.0
I (1667) esp32_boot: ENV: HOSTNAME=imsai8080
I (1672) esp32_boot: ENV: PORT=80
I (1676) esp32_boot: ENV: SSID=mySSID
I (1680) esp32_boot: ENV: PASSWORD=myPASSWORD
I (1685) esp32_boot: ENV: WIFI.sta.scan=1
I (1690) esp32_boot: ENV: TTY.netsrv.buffer_delay=33
I (1695) esp32_boot: ENV: LPT.netsrv.buffer_delay=33
I (1701) esp32_boot: ENV: HARDDISK=hd-ws4
I (1706) esp32_boot: ENV: MODEM.init=ATS15=1
I (1713) wifi:wifi driver task: 3ffd7b74, prio:23, stack:6656, core=0
I (1717) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (1726) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (1749) wifi:wifi firmware version: fa1ff47
I (1749) wifi:config NVS flash: enabled
I (1750) wifi:config nano formating: disabled
I (1750) wifi:Init data frame dynamic rx buffer num: 32
I (1755) wifi:Init management frame dynamic rx buffer num: 32
I (1760) wifi:Init management short buffer num: 32
I (1765) wifi:Init dynamic tx buffer num: 32
I (1769) wifi:Init static rx buffer size: 1600
I (1773) wifi:Init static rx buffer num: 16
I (1777) wifi:Init dynamic rx buffer num: 32
I (1782) wifi:Set ps type: 0

I (1784) esp32_hardware: MAC ADDR: d8:a0:1d:5d:d7:7d
I (1789) esp32_netsrv: AP Mode - Using SSID: imsai8080 (HOSTNAME)
I (1798) esp32_netsrv: Starting Wi-Fi now
I (1883) phy: phy_version: 4390, 6b3c1f2, Sep 10 2020, 15:09:07, 0, 0
I (1884) wifi:mode : softAP (d8:a0:1d:5d:d7:7d)
I (1886) wifi:Total power save buffer number: 16
I (1888) wifi:Init max length of beacon: 752/752
I (1892) wifi:Init max length of beacon: 752/752
I (1897) esp32_netsrv: EVENT: WIFI_EVENT - 12
I (1901) esp32_netsrv: soft-AP started
I (1906) esp32_netsrv: Initializing hostname to: imsai8080
I (1912) captdns: CaptDNS inited
I (2912) esp32_netsrv: Initializing MDNS
I (2914) esp32_netsrv: Initializing SNTP
I (2914) netsrv: Using HTTP Port: 80 [80]
I (2914) httpd-freertos: address 0.0.0.0, port 80, maxConnections 12, mode non-ssl
I (2923) httpd-freertos: init
I (2927) httpd-freertos: esphttpd: active and listening to connections on 0.0.0.0
I (2934) httpd-freertos: listening for new connections on '0.0.0.0'
I (2941) esp32_netsrv: WiFi result is 1
W (2946) esp32_boot: Cannot set system time by NTP in AP mode, or no NTP_SERVER set
I (2954) esp32_boot: The current date/time is: Thu Jan  1 11:00:01 1970 [1]
I (2962) esp32_hardware: IMSAI POST flash timer stopped
I (2968) esp32_boot: Starting Watchdog Timer

#######  #####    ###            #####    ###   #     #
     #  #     #  #   #          #     #    #    ##   ##
    #   #     # #     #         #          #    # # # #
   #     #####  #     #  #####   #####     #    #  #  #
  #     #     # #     #               #    #    #     #
 #      #     #  #   #          #     #    #    #     #
#######  #####    ###            #####    ###   #     #

Release 1.37, Copyright (C) 1987-2021 by Udo Munk
ESP32 IMSAI 8080 Simulation Release 1.18 (ESP32)
Copyright (C) 2008-2021 by Udo Munk & David McNaughton

CPU speed is 4 MHz, CPU executes undocumented instructions
W (7820) config: system.conf unknown command: sio1b_upper_case
W (7822) config: system.conf unknown command: sio1b_strip_parity
W (7829) config: system.conf unknown command: sio1b_drop_nulls
W (7835) config: system.conf unknown command: sio1b_baud_rate
W (7843) config: system.conf unknown command: sio2b_upper_case
W (7848) config: system.conf unknown command: sio2b_strip_parity
W (7855) config: system.conf unknown command: sio2b_drop_nulls
W (7862) config: system.conf unknown command: [MEMORY
RAM size bank 0 is 0 KB
W (7869) config: system.conf unknown command: rom
W (7875) config: system.conf unknown command: boot
W (7880) config: system.conf unknown command: [MEMORY
RAM size bank 0 is 0 KB
W (7888) config: system.conf unknown command: rom
RAM size bank 0 is 0 KB
W (7896) config: system.conf unknown command: rom
W (7901) config: system.conf unknown command: boot
W (7907) config: system.conf unknown command: [MEMORY
RAM size bank 0 is 0 KB
W (7915) config: system.conf unknown command: rom
W (7920) config: system.conf unknown command: boot
W (7925) config: system.conf unknown command: [MEMORY
W (7932) config: system.conf unknown command: rom
RAM size bank 0 is 64 KB
W (7939) config: system.conf unknown command: boot
MPU-B Banked ROM/RAM enabled
MMU & Banked RAM initialised: 48 KB x 15 banks
I (8480) init_bank_ram: Banked memory initialised

can't open file /sdcard/imsai/bootrom.hex

I checked the folder structure, and it seems to be correct.

C:\Users\mikek>tree /F /A g:\
Folder PATH listing
Volume serial number is 000001D6 642C:E50C
G:\
+---www
|   |   index.html
|   |   favicon.ico
|   |
|   +---console
|   |       96bfea03aea298746a54.js.gz
|   |       9133e8b95c743238069dca848fd2c7e5.woff
|   |       4917c8007155dafdef6c8169bc5b8c80.png
|   |       5d9a5f3004f1d3a9eddef5c93a47080b.png
|   |       5238906576c0d20a245a2c634891ee25.png
|   |       2e0215f7eae79b69b4aae0d02282cf5b.png
|   |       3329724309b4b0f0d6ed582438daef9e.png
|   |       1254337076da6a2ab08884243e04a7f6.png
|   |       912ec66d7572ff821749319396470bde.svg.gz
|   |       ea08d0afd8bd56deff21853ca2094dd4.png
|   |       292b09a42c95c6ba03366868a16e7341.png
|   |       index.html
|   |       ea737233e698ee586c1e023c0d5c6b3f.jpg
|   |       b28dc9bbb07982aecdb5bd99bc44902f.jpg
|   |       af7ae505a9eed503f8b8e6982036873e.woff2
|   |       60ee10e25cd520e13f27cd06e00d00a3.jpg
|   |       b6913747363dcd59cb4d88075e1074b2.jpg
|   |       645b343092120b9178db46edda8e0222.png
|   |       d34ab63efaad52452aa07a6832f94f67.png
|   |       674f50d287a8c48dc19ba404d20fe713.eot
|   |       a34c84bf7d3818f839faa628ab44e56e.png
|   |       6e72d0549e9bb0b09be5ee5b79d3b885.png
|   |       05d4e5c515a8e542d6c36cccbc98bd05.woff
|   |       0783b555ba955d0caba6365c7494a4eb.jpg
|   |       f767654b87b77fd3dbcf4359d1fddf74.png
|   |       b06871f281fee6b241d60582ae9369b9.ttf
|   |       7068e488b34f875324dd817fcfe5fe38.jpg
|   |       a89d30c4557ca49295771c4e23468c74.woff
|   |       9dfeb7f3176a899ea57663580cb8525b.woff
|   |       aeac105bd1eb577cec759cbedd6fd02d.png
|   |       cf959bab701d45606770079d22c10a35.png
|   |       154c97ffc71d8cb87c7b249bd6f42d5c.woff2
|   |       9bdb2b7815f2ee380326d5e908aa53ed.woff2
|   |       551f9f437802c9e3293ae61b9b9fae76.png
|   |       1b2d08f0f1655d91fbef3fee60d940ba.png
|   |       4d078347491b120c7dba1119d809f48d.woff2
|   |       791a7c8d1d460b0b32b7e8211a5f5a47.png
|   |       8263a9525419c361ecc46b1ddccd3ba3.jpg
|   |       561d633ffc9e64dc265c6dd6f37e618a.png
|   |       df853c4802097aae8ccd714406a3c124.png
|   |       0160b421c1e76cce83033846be1fb940.png
|   |       25a4dc822df3254309d0667b8e461499.woff2
|   |       b75513d08dbaac244884f4a247b42fe0.png
|   |       d20ffa0bd4dbcac9f09b7f87fe86a27b.png
|   |       9f7781579ba9bef948d8bf6699e8baba.png
|   |       2f8ed635208ae330d9f044a2e1d5a382.svg.gz
|   |       8ce4f84f3439f355f3aa1b0613587b2f.jpg
|   |       20f2ad7a8f324c4a865718365199726c.jpg
|   |       8fb5fec1fc10822156d57f5593d08c76.png
|   |       fee66e712a8a08eef5805a46892932ad.woff
|   |
|   \---printer
|           f23fa0d0e1905dfec9156086ef12a7ff.svg.gz
|           912ec66d7572ff821749319396470bde.svg.gz
|           index.html
|           9cfd0c29035207cd7f72b5c56d25ea08.svg.gz
|           af7ae505a9eed503f8b8e6982036873e.woff2
|           e83a3bb1dd183bde502f5b9e22eb1516.svg.gz
|           674f50d287a8c48dc19ba404d20fe713.eot
|           848a69f3846ddc6e3239.js.gz
|           b06871f281fee6b241d60582ae9369b9.ttf
|           8c11641321eb1a97c00555a86a489eee.svg.gz
|           b83fdf901ce30a8f2b7c0938d562e29f.svg.gz
|           6e1c734449687c8513404cbdd1d1c291.svg.gz
|           fee66e712a8a08eef5805a46892932ad.woff
|
\---imsai
    |   printer.txt
    |   basic8k.hex
    |   memon80.hex
    |   mpu-a-rom.hex
    |   viofm1.hex
    |   xybasic.hex
    |   basic4k.hex
    |
    +---tapes
    |       life.hex
    |       dzmation.hex
    |       kscope.hex
    |       basic8k.hex
    |       magmarti.ptp
    |
    +---manual
    |       8080 Assembly.pdf.png
    |       Cromemco 88 ACC.pdf.png
    |       Cromemco 88 CCC.pdf
    |       Z80 R Zaks.pdf.png
    |       Cromemco 88 ACC.pdf
    |       Cromemco JS-1 Joystick.pdf.png
    |       IMSAI 8080 User Manual.pdf.png
    |       Cromemco Dazzler Games.pdf
    |       Cromemco Dazzler.pdf
    |       Tektronix 4014 User Manual.pdf.png
    |       Cromemco Dazzler Games.pdf.png
    |       Cromemco Dazzler.pdf.png
    |       Cromemco D+7A┬áIO.pdf.png
    |       CP-M 80 Kermit.pdf.png
    |       8080 Assembly.pdf
    |       Z80 R Zaks.pdf
    |       Cromemco 88 CCC.pdf.png
    |       Cromemco D+7A┬áIO.pdf
    |       Cromemco JS-1 Joystick.pdf
    |       CP-M 2.2.pdf.png
    |       CP-M 2.2.pdf
    |       Memon80 Users Manual.pdf
    |       Tektronix 4014 User Manual.pdf
    |       Memon80 Users Manual.pdf.png
    |       CP-M 80 Kermit.pdf
    |       IMSAI 8080 User Manual.pdf
    |
    +---disks
    |       Zork.dsk
    |       xybasic.dsk
    |       dbaseii.dsk
    |       disk.map
    |       Cyclops.dsk
    |       VT-art.dsk
    |       ZorkIII.dsk
    |       dazzlerII.dsk
    |       hd-ws4.hdd
    |       supercalc.dsk
    |       cpm22b01.dsk
    |       dazzler_stuff.dsk
    |       dazzler_graphics.dsk
    |       apu.dsk
    |       vio-stuff.dsk
    |       ZorkII.dsk
    |       dazzler.dsk
    |       comms.dsk
    |       plotv1.dsk
    |       ws33.dsk
    |
    \---conf
            boot.conf
            system.conf

oilcan-productions · 2023-04-10T17:58:38Z

oilcan-productions
Apr 10, 2023
Author

I am able to boot to BASIC though. Only CPM boot fails.

0 replies

oilcan-productions · 2023-04-10T18:47:20Z

oilcan-productions
Apr 10, 2023
Author

Figured it out. My ESP32 needed a FW update. I thought I did that but obviously not lately. So it was behind and did not understand the new folder structure on the uSD card. All fixed now and up and running. Thanks

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

TheHighNibble

Not booting from uSD card #43

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{editor}}'s edit

{{editor}}'s edit

Uh oh!

Replies: 2 comments

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Select a reply

Uh oh!

TheHighNibble

Not booting from uSD card #43

Uh oh!

Uh oh!

oilcan-productions Apr 10, 2023

Replies: 2 comments

Uh oh!

oilcan-productions Apr 10, 2023 Author

Uh oh!

oilcan-productions Apr 10, 2023 Author

oilcan-productions
Apr 10, 2023

oilcan-productions
Apr 10, 2023
Author

oilcan-productions
Apr 10, 2023
Author