-
Notifications
You must be signed in to change notification settings - Fork 3
4.1.4 ti 49 with simple audio card
Rick edited this page Oct 2, 2015
·
1 revision
root@beaglebone:/home/debian# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.4-ti-r9 (root@b1-omap5-uevm-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Tue Aug 11 00:31:44 UTC 2015
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Black
[ 0.000000] cma: Reserved 24 MiB at 0x9e000000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c0f8e700, node_mem_map df96d000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df928000 s22336 r8192 d22720 u53248
[ 0.000000] pcpu-alloc: s22336 r8192 d22720 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8 dyndbg="file drivers/of/base.c +pflm; file sound* +pflm; file *cape* +pflm" root=UUID=69f859b1-c308-41c9-8ca7-a3d0042031e8 ro rootfstype=ext4 rootwait fixrtc coherent_pool=1M quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 470984K/522240K available (10710K kernel code, 924K rwdata, 3708K rodata, 684K init, 902K bss, 26680K reserved, 24576K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0e1cdf8 (14420 kB)
.init : 0xc0e1d000 - 0xc0ec8000 ( 684 kB)
.data : 0xc0ec8000 - 0xc0faf014 ( 925 kB)
.bss : 0xc0fb2000 - 0xc10938c0 ( 903 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000039] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000053] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000424] Console: colour dummy device 80x30
[ 0.000453] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.000462] This ensures that you still see kernel messages. Please
[ 0.000470] update your kernel commandline.
[ 0.000492] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.088800] pid_max: default: 32768 minimum: 301
[ 0.088969] Security Framework initialized
[ 0.089055] AppArmor: AppArmor disabled by boot time parameter
[ 0.089065] Yama: becoming mindful.
[ 0.089295] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.089311] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090238] Initializing cgroup subsys blkio
[ 0.090266] Initializing cgroup subsys memory
[ 0.090316] Initializing cgroup subsys devices
[ 0.090336] Initializing cgroup subsys freezer
[ 0.090365] Initializing cgroup subsys net_cls
[ 0.090382] Initializing cgroup subsys perf_event
[ 0.090399] Initializing cgroup subsys net_prio
[ 0.090459] CPU: Testing write buffer coherency: ok
[ 0.090522] ftrace: allocating 34724 entries in 102 pages
[ 0.183968] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.184092] Setting up static identity map for 0x80008280 - 0x800082d8
[ 0.238880] Brought up 1 CPUs
[ 0.238907] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[ 0.238917] CPU: All CPU(s) started in SVC mode.
[ 0.239834] devtmpfs: initialized
[ 0.257658] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.277657] omap_hwmod: tptc0 using broken dt data from edma
[ 0.277888] omap_hwmod: tptc1 using broken dt data from edma
[ 0.278096] omap_hwmod: tptc2 using broken dt data from edma
[ 0.284010] omap_hwmod: debugss: _wait_target_disable failed
[ 0.338866] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.341010] xor: measuring software checksum speed
[ 0.438895] arm4regs : 1219.600 MB/sec
[ 0.538828] 8regs : 1092.400 MB/sec
[ 0.638826] 32regs : 1090.000 MB/sec
[ 0.738828] neon : 1665.600 MB/sec
[ 0.738837] xor: using function: neon (1665.600 MB/sec)
[ 0.739014] pinctrl core: initialized pinctrl subsystem
[ 0.741048] NET: Registered protocol family 16
[ 0.744777] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.751055] OMAP GPIO hardware version 0.1
[ 0.762193] No ATAGs?
[ 0.762227] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.764168] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ 0.764187] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ 0.969123] raid6: int32x1 gen() 231 MB/s
[ 1.138851] raid6: int32x1 xor() 175 MB/s
[ 1.308959] raid6: int32x2 gen() 304 MB/s
[ 1.478910] raid6: int32x2 xor() 199 MB/s
[ 1.648977] raid6: int32x4 gen() 284 MB/s
[ 1.818901] raid6: int32x4 xor() 199 MB/s
[ 1.988914] raid6: int32x8 gen() 282 MB/s
[ 2.158955] raid6: int32x8 xor() 186 MB/s
[ 2.328832] raid6: neonx1 gen() 1458 MB/s
[ 2.498835] raid6: neonx2 gen() 1887 MB/s
[ 2.668829] raid6: neonx4 gen() 1921 MB/s
[ 2.838872] raid6: neonx8 gen() 811 MB/s
[ 2.838882] raid6: using algorithm neonx4 gen() 1921 MB/s
[ 2.838891] raid6: using intx1 recovery algorithm
[ 2.848342] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 2.851700] vgaarb: loaded
[ 2.852454] SCSI subsystem initialized
[ 2.852859] libata version 3.00 loaded.
[ 2.853227] usbcore: registered new interface driver usbfs
[ 2.853307] usbcore: registered new interface driver hub
[ 2.853419] usbcore: registered new device driver usb
[ 2.854020] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 2.854079] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[ 2.854229] pps_core: LinuxPPS API ver. 1 registered
[ 2.854239] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 2.854278] PTP clock support registered
[ 2.855066] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 2.855820] Advanced Linux Sound Architecture Driver Initialized.
[ 2.856659] NetLabel: Initializing
[ 2.856672] NetLabel: domain hash size = 128
[ 2.856679] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.856744] NetLabel: unlabeled traffic allowed by default
[ 2.857087] Switched to clocksource timer1
[ 2.981571] NET: Registered protocol family 2
[ 2.982546] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.982600] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.982660] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.982750] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.982774] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.983097] NET: Registered protocol family 1
[ 2.983716] RPC: Registered named UNIX socket transport module.
[ 2.983732] RPC: Registered udp transport module.
[ 2.983740] RPC: Registered tcp transport module.
[ 2.983747] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.983777] PCI: CLS 0 bytes, default 64
[ 2.984392] Unpacking initramfs...
[ 3.281669] Freeing initrd memory: 4316K (cfbc9000 - d0000000)
[ 3.282190] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[ 3.282264] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 3.285057] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 3.285186] audit: initializing netlink subsys (disabled)
[ 3.285298] audit: type=2000 audit(3.220:1): initialized
[ 3.286905] zpool: loaded
[ 3.287500] VFS: Disk quotas dquot_6.6.0
[ 3.287595] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.288416] NFS: Registering the id_resolver key type
[ 3.288490] Key type id_resolver registered
[ 3.288500] Key type id_legacy registered
[ 3.288528] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.288898] fuse init (API version 7.23)
[ 3.289178] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.292724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.292984] io scheduler noop registered
[ 3.293001] io scheduler deadline registered
[ 3.293040] io scheduler cfq registered (default)
[ 3.294518] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 3.296714] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 3.298345] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 3.301675] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 155, base_baud = 3000000) is a 8250
[ 3.309164] console [ttyS0] enabled
[ 3.310634] [drm] Initialized drm 1.1.0 20060810
[ 3.310755] usbcore: registered new interface driver udl
[ 3.311342] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.316497] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 3.316587] usbcore: registered new interface driver pegasus
[ 3.316659] usbcore: registered new interface driver rtl8150
[ 3.316721] usbcore: registered new interface driver r8152
[ 3.318536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.318581] ehci-pci: EHCI PCI platform driver
[ 3.318653] ehci-platform: EHCI generic platform driver
[ 3.318821] ehci-omap: OMAP-EHCI Host Controller driver
[ 3.320583] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 3.349408] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.349431] musb-hdrc: MHDRC RTL version 2.0
[ 3.349441] musb-hdrc: setup fifo_mode 4
[ 3.349462] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.350895] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 3.409288] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.409310] musb-hdrc: MHDRC RTL version 2.0
[ 3.409319] musb-hdrc: setup fifo_mode 4
[ 3.409338] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.409497] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.409874] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.410174] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.410188] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.410199] usb usb1: Product: MUSB HDRC host driver
[ 3.410209] usb usb1: Manufacturer: Linux 4.1.4-ti-r9 musb-hcd
[ 3.410219] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.411087] hub 1-0:1.0: USB hub found
[ 3.411155] hub 1-0:1.0: 1 port detected
[ 3.488127] mousedev: PS/2 mouse device common for all mice
[ 3.489103] omap_rtc 44e3e000.rtc: already running
[ 3.489595] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.490387] i2c /dev entries driver
[ 3.491955] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.492949] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 3.578582] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.578946] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.584241] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.586241] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.588012] usbcore: registered new interface driver usbhid
[ 3.588028] usbhid: USB HID core driver
[ 3.589367] ashmem: initialized
[ 3.592327] remoteproc0: wkup_m3 is available
[ 3.592343] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 3.592352] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 3.595234] snd_soc_core:snd_soc_register_codec:3064: snd-soc-dummy snd-soc-dummy: codec register snd-soc-dummy
[ 3.595286] snd_soc_core:snd_soc_register_dais:2590: snd-soc-dummy snd-soc-dummy: ASoC: dai register snd-soc-dummy #1
[ 3.595305] snd_soc_core:snd_soc_register_dais:2634: snd-soc-dummy snd-soc-dummy: ASoC: Registered DAI 'snd-soc-dummy-dai'
[ 3.595320] snd_soc_core:snd_soc_register_codec:3138: snd-soc-dummy snd-soc-dummy: ASoC: Registered codec 'snd-soc-dummy'
[ 3.595335] snd_soc_core:snd_soc_register_platform:2909: snd-soc-dummy snd-soc-dummy: ASoC: platform register snd-soc-dummy
[ 3.595353] snd_soc_core:snd_soc_add_platform:2892: snd-soc-dummy snd-soc-dummy: ASoC: Registered platform 'snd-soc-dummy'
[ 3.595877] oprofile: using arm/armv7
[ 3.596329] NET: Registered protocol family 10
[ 3.598232] mip6: Mobile IPv6
[ 3.598269] NET: Registered protocol family 17
[ 3.598426] Key type dns_resolver registered
[ 3.598443] mpls_gso: MPLS GSO support
[ 3.598766] omap_voltage_late_init: Voltage driver support not added
[ 3.605674] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517
[ 3.605696] cpu cpu0: cpu0 clock notifier not ready, retry
[ 3.611993] ThumbEE CPU extension supported.
[ 3.612029] Registering SWP/SWPB emulation handler
[ 3.612231] PM: bootloader does not support rtc-only!
[ 3.613744] registered taskstats version 1
[ 3.614889] Btrfs loaded
[ 3.625311] mmc1: MAN_BKOPS_EN bit is not set
[ 3.630618] mmc1: new high speed MMC card at address 0001
[ 3.635122] mmcblk0: mmc1:0001 MMC04G 3.60 GiB
[ 3.635526] mmcblk0boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 3.635884] mmcblk0boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 3.637517] mmcblk0: p1
[ 3.645237] Key type encrypted registered
[ 3.676182] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.676771] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.676827] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.678880] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.679311] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.679713] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.680120] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.680166] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 3.681304] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.681567] remoteproc0: powering up wkup_m3
[ 3.681592] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 219663
[ 3.681859] remoteproc0: remote processor wkup_m3 is now up
[ 3.681884] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version 190 not supported
[ 3.687583] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,00C0,3214BBBK4221'
[ 3.687619] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
[ 3.687656] base:of_property_match_string:1398: comparing slot0 with baseboard
[ 3.687668] base:of_property_match_string:1398: comparing slot0 with slot0
[ 3.747107] bone_capemgr bone_capemgr: slot #0: No cape found
[ 3.752908] base:of_property_match_string:1398: comparing slot1 with baseboard
[ 3.752919] base:of_property_match_string:1398: comparing slot1 with slot0
[ 3.752929] base:of_property_match_string:1398: comparing slot1 with slot1
[ 3.807101] bone_capemgr bone_capemgr: slot #1: No cape found
[ 3.812891] base:of_property_match_string:1398: comparing slot2 with baseboard
[ 3.812902] base:of_property_match_string:1398: comparing slot2 with slot0
[ 3.812912] base:of_property_match_string:1398: comparing slot2 with slot1
[ 3.812922] base:of_property_match_string:1398: comparing slot2 with slot2
[ 3.827115] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 3.867100] bone_capemgr bone_capemgr: slot #2: No cape found
[ 3.872899] base:of_property_match_string:1398: comparing slot3 with baseboard
[ 3.872911] base:of_property_match_string:1398: comparing slot3 with slot0
[ 3.872921] base:of_property_match_string:1398: comparing slot3 with slot1
[ 3.872931] base:of_property_match_string:1398: comparing slot3 with slot2
[ 3.872940] base:of_property_match_string:1398: comparing slot3 with slot3
[ 3.897000] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 3
[ 3.904203] bone_capemgr bone_capemgr: slot #3: No cape found
[ 3.910103] bone_capemgr bone_capemgr: initialized OK.
[ 3.910786] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.911285] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.967152] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.967175] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.967722] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 3.967760] davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffe]
[ 3.969036] usb 1-1: New USB device found, idVendor=0bda, idProduct=8176
[ 3.969055] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.969065] usb 1-1: Product: 802.11n WLAN Adapter
[ 3.969075] usb 1-1: Manufacturer: Realtek
[ 3.969085] usb 1-1: SerialNumber: 00e04c000001
[ 3.976078] libphy: 4a101000.mdio: probed
[ 3.976113] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.977057] cpsw 4a100000.ethernet: Detected MACID = 6c:ec:eb:5c:4d:a5
[ 3.977344] base:of_property_match_string:1398: comparing fck with fck
[ 3.979161] omap_rtc 44e3e000.rtc: setting system clock to 2015-10-02 09:17:51 UTC (1443777471)
[ 3.979194] of_cfs_init
[ 3.979334] of_cfs_init: OK
[ 3.985330] PM: Hibernation image not present or could not be loaded.
[ 3.985490] ALSA device list:
[ 3.985500] No soundcards found.
[ 3.986976] Freeing unused kernel memory: 684K (c0e1d000 - c0ec8000)
[ 4.079335] systemd-udevd[107]: starting version 215
[ 4.081771] random: systemd-udevd urandom read with 10 bits of entropy available
[ 4.935791] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.573871] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.818093] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ 6.431849] systemd-udevd[188]: starting version 215
[ 6.741515] systemd-journald[184]: Received request to flush runtime journal from PID 1
[ 7.696795] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 7.883539] cfg80211: Calling CRDA to update world regulatory domain
[ 8.179464] rtl8192cu: Chip version 0x10
[ 8.362843] random: nonblocking pool is initialized
[ 8.396838] rtl8192cu: MAC address: 00:13:ef:c0:0b:5c
[ 8.396925] rtl8192cu: Board Type 0
[ 8.397040] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 8.398240] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 8.399494] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error -2
[ 8.399564] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
[ 8.399578] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
[ 8.399586] rtlwifi: Firmware rtlwifi/rtl8192cufw_TMSC.bin not available
[ 8.442470] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 8.446695] usbcore: registered new interface driver rtl8192cu
[ 8.620631] cfg80211: World regulatory domain updated:
[ 8.620670] cfg80211: DFS Master region: unset
[ 8.620681] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.620696] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.620708] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.620718] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.620731] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 8.620743] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 8.620754] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 8.620764] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.620774] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.003355] net eth0: initializing cpsw version 1.12 (0)
[ 9.005766] net eth0: phy found : id is : 0x7c0f1
[ 9.005876] libphy: PHY 4a101000.mdio:01 not found
[ 9.013417] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 9.024991] base:of_property_match_string:1398: comparing cpts with fck
[ 9.025016] base:of_property_match_string:1398: comparing cpts with cpts
[ 9.025110] net eth0: BQL enabled
[ 9.031168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.077843] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 12.078087] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.564259] using random self ethernet address
[ 17.564291] using random host ethernet address
[ 17.564309] using host ethernet address: 6C:EC:EB:5C:4D:A7
[ 17.564321] using self ethernet address: 6C:EC:EB:5C:4D:A0
[ 17.565713] usb0: HOST MAC 6c:ec:eb:5c:4d:a7
[ 17.566054] usb0: MAC 6c:ec:eb:5c:4d:a0
[ 17.566115] using random self ethernet address
[ 17.566130] using random host ethernet address
[ 17.566226] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 17.566240] g_ether gadget: g_ether ready
[ 20.693227] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 41.346858] bone_capemgr bone_capemgr: part_number 'BB-ENABLE-PRU', version 'N/A'
[ 41.346900] bone_capemgr bone_capemgr: slot #4: override
[ 41.346918] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
[ 41.346935] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,BB-ENABLE-PRU'
[ 41.347070] bone_capemgr:capemgr_load_slot:1148: bone_capemgr bone_capemgr: slot #4: Requesting part number/version based 'BB-ENABLE-PRU-00A0.dtbo
[ 41.347090] bone_capemgr:capemgr_load_slot:1162: bone_capemgr bone_capemgr: slot #4: Requesting firmware 'BB-ENABLE-PRU-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 41.353453] bone_capemgr:capemgr_load_slot:1171: bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; converting to live tree
[ 41.365201] gpio-of-helper ocp:gpio_helper: ready
[ 41.372559] pruss_uio 4a300000.pruss: pins are not configured from the driver
[ 41.385211] bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; overlay id #0
[ 41.439043] snd_soc_core:snd_soc_register_codec:3064: tlv320aic3x-codec 2-0018: codec register 2-0018
[ 41.439098] snd_soc_core:snd_soc_register_dais:2590: tlv320aic3x-codec 2-0018: ASoC: dai register 2-0018 #1
[ 41.439116] snd_soc_core:snd_soc_register_dais:2634: tlv320aic3x-codec 2-0018: ASoC: Registered DAI 'tlv320aic3x-hifi'
[ 41.439134] snd_soc_core:snd_soc_register_codec:3138: tlv320aic3x-codec 2-0018: ASoC: Registered codec 'tlv320aic3x-codec.2-0018'
[ 41.453699] base:of_property_match_string:1398: comparing tx with tx
[ 41.453980] base:of_property_match_string:1398: comparing rx with tx
[ 41.453995] base:of_property_match_string:1398: comparing rx with rx
[ 41.454053] base:of_property_match_string:1398: comparing common with tx
[ 41.454065] base:of_property_match_string:1398: comparing common with rx
[ 41.454079] base:of_property_match_string:1398: comparing rx with tx
[ 41.454089] base:of_property_match_string:1398: comparing rx with rx
[ 41.464010] base:of_property_match_string:1398: comparing tx with tx
[ 41.469481] snd_soc_core:snd_soc_register_dais:2590: davinci-mcasp 48038000.mcasp: ASoC: dai register 48038000.mcasp #1
[ 41.469531] snd_soc_core:snd_soc_register_dais:2634: davinci-mcasp 48038000.mcasp: ASoC: Registered DAI '48038000.mcasp'
[ 41.469693] snd_soc_core:snd_soc_add_platform:2892: davinci-mcasp 48038000.mcasp: ASoC: Registered platform '48038000.mcasp'
[ 41.470601] snd_soc_core:soc_bind_dai_link:938: asoc-simple-card sound: ASoC: binding davinci-mcasp.0-tlv320aic3x-hifi at idx 0
[ 41.470928] snd_soc_core:snd_soc_dapm_new_dai_widgets:3494: tlv320aic3x-codec 2-0018: ASoC: adding Playback widget
[ 41.470950] snd_soc_core:snd_soc_dapm_new_dai_widgets:3513: tlv320aic3x-codec 2-0018: ASoC: adding Capture widget
[ 41.471496] snd_soc_core:soc_probe_link_dais:1334: asoc-simple-card sound: ASoC: probe Podtique Simple Audio Card dai link 0 late -2
[ 41.471516] snd_soc_core:soc_probe_link_dais:1334: asoc-simple-card sound: ASoC: probe Podtique Simple Audio Card dai link 0 late -1
[ 41.471531] snd_soc_core:soc_probe_link_dais:1334: asoc-simple-card sound: ASoC: probe Podtique Simple Audio Card dai link 0 late 0
[ 41.471545] snd_soc_core:soc_probe_link_dais:1334: asoc-simple-card sound: ASoC: probe Podtique Simple Audio Card dai link 0 late 1
[ 41.471558] snd_soc_core:soc_probe_link_dais:1334: asoc-simple-card sound: ASoC: probe Podtique Simple Audio Card dai link 0 late 2
[ 41.472038] snd_soc_core:soc_new_pcm:2510: asoc-simple-card sound: ASoC: registered pcm #0 davinci-mcasp.0-tlv320aic3x-hifi tlv320aic3x-hifi-0
[ 41.472823] asoc-simple-card sound: tlv320aic3x-hifi <-> 48038000.mcasp mapping ok
[ 41.472854] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Right ADC -> Capture
[ 41.472872] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Left ADC -> Capture
[ 41.472891] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Right DAC
[ 41.472905] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Left DAC