QA-tests: update some details

tests/QA/002-new-instance.md

@@ -11,7 +11,7 @@ For the below to work, it is important that you have a domain that you point ont
     - [ ] Entering the domain that does point to your server e.g. `yourdomain.com` should finally redirect you to the next screen (if you did not configure your domain yet or did not open port 443, it should report that to you)
 - [ ] Now you should see a button `Start containers` and an explanation which points out that clicking on the button will start the containers and that this can take a long time.
 - [ ] Below that you should see a section `Optional addons` which shows a checkbox list with addons that can be enabled or disabled.
-    - [ ] Collabora and Nextcloud Talk should be enabled, the rest disabled
+    - [ ] Collabora, Imaginary, Talk and Whiteboard should be enabled, the rest disabled
     - [ ] Unchecking/Checking any of these should insert a button that allows to save the set config
     - [ ] Checking OnlyOffice and Collabora at the same time should show a warning that this is not supported and should  not saving the new config
     - [ ] Recommended is to uncheck all options now

tests/QA/004-initial-backup.md

@@ -1,18 +1,22 @@
 # Initial backup
 
-- [ ] In the Backup and restore section, you should now see and input box where you should type in the path where the backup should get created and some explanation below
+- [ ] In the Backup and restore section, you should now see two input boxes where for one you should type in the path where the backup should get created and some explanation below or the other type in a remote ssh location
     - [ ] Enter `/` which should send an error
     - [ ] Enter `/mnt/` or  `/media/` or `/host_mnt/` or `/var/backups/` should send an error as well
     - [ ] Accepted should be `/mnt/backup`, `/media/backup`, `/host_mnt/c/backup` and `/var/backups`.
     - [ ] The side should now reload
+- [ ] another option are remote backups
+    - [ ] Enter `/` which should send an error
+    - [ ] ...
+    - [ ] The side should now reload
 - [ ] The initial Nextcloud credentials on top of the page that are visible when the containers are running should now be hidden in a details tag
 - [ ] In the Backup restore section you should now see a Backup information section with important info like the encryption password, the backup location and more.
-- [ ] Also you should see a Backup cretion section that contains a `Create backup` button.
+- [ ] Also you should see a Backup creation section that contains a `Create backup` button.
 - [ ] Clicking on the `Create backup` button should open a window prompt that allows to cancel the operation.
 - [ ] Canceling should return to the website, confirming should reveal the big spinner again which should block the website again.
 - [ ] After a while you should see the information that Backup container is currently running
 - [ ] Below the Containers section you should see the option to `Start containers` again.
 - [ ] After a while and a few automatic reloads (as long as the side is focused), you should be redirected to the usual page and seen in the Backup and restore section that the last backup was successful.
-- [ ] Below thhat you should see a details tag that allows to reveal all backup options
+- [ ] Below that you should see a details tag that allows to reveal all backup options
 
 You can now continue with [020-backup-and-restore.md](.//020-backup-and-restore.md)

tests/QA/010-restore-instance.md

@@ -2,7 +2,7 @@
 
 For the below to work, you need a backup archive of an AIO instance and the location on the test machine and the password for the backup archive. You can get one here: [backup-archive](./assets/backup-archive/)
 
-- [ ] The section that allows to restore the whole AIO instance from backup should show two input fields: one that allows to enter a location where the backup archive is located and one that allows to enter password of the archive. It should also show a short explanation regarding the path requirements
+- [ ] The section that allows to restore the whole AIO instance from backup should show three input fields: one that allows to enter a location where the backup archive is located and one that allows to enter a remote ssh path and one that allows to enter password of the archive. It should also show a short explanation regarding the path requirements
 - [ ] Entering an incorrect path and/or password should let you continue and test your settings in the next step
     - [ ] Clicking on the test button should after a reload bring you back to the initial screen where it should say that the test was unsuccessful. Also you should be able to have a look at the backup container logs for investigation what exactly failed.
     - [ ] You should also now see the input boxes again where you can change the path and password, confirm it and bring you again to the screen where you can test your settings.
@@ -13,6 +13,7 @@ For the below to work, you need a backup archive of an AIO instance and the loca
     - [ ] Clicking on the integrity check option should check the integrity and report that the backup integrity is good after a while which should then only show the option to choose the backup archive that should be restored
     - [ ] Choosing the restore option should finally restore your files. 
     - [ ] After waiting a while it should reload the page and should show the usual container interface again with the state of your containers (stopped) and the option to start and update the containers again.
+
 - [ ] Clicking on `Start and update containers` should show a window prompt that you should create a backup. Canceling should cancel the operation, confirming should reveal the big spinner again.
 - [ ] After waiting a bit, all containers should be green and your instance should be fully functional again
 

tests/QA/020-backup-and-restore.md

@@ -1,6 +1,6 @@
 # Backup and restore
 
-- [ ] Expanding all backup options in the Backup and restore sectioin should reveal a Backup information section, Backup creation section, Backup check section, Backup restore section and a Daily backup section.
+- [ ] Expanding all backup options in the Backup and restore sectioin should reveal a Backup information section, Backup creation section, Backup check section, Backup restore section and a Daily backup section as well as a additional backup location section
 - [ ] The backup restore section should list all available backup archives and list them from most recent to least recent.
 - [ ] Clicking on either option of Create backup, Check backup integrity or Restore selected backup should run the corresponding action and report after a while in the last check, backup or restore was successful.
 - [ ] Daily backup creatio should allow to enter a time in 24h format e.g. `04:00` should be accepted, `24:00` or `dfjlk` not.

tests/QA/050-optional-addons.md

@@ -10,6 +10,8 @@
     - [ ] Imaginary by having a look if when uploading a new picture in Nextcloud, it adds some log entries to the container
     - [ ] Fulltextsearch by trying to search for a heading inside a file in Nextcloud
     - [ ] Talk-recording by starting a call and trying to record something
-- [ ] When Collabora is enabled, it should show below the Optional Addons section a section where you can change the dictionaries for collabora. `de_DE en_GB en_US es_ES fr_FR it nl pt_BR pt_PT ru` should be a valid setting. E.g. `de.De` not. If already set, it should show a button that allows to remove the setting again.
+- [ ] When Collabora is enabled
+    - [ ] It should show below the Optional Addons section a section where you can change the dictionaries for collabora. `de_DE en_GB en_US es_ES fr_FR it nl pt_BR pt_PT ru` should be a valid setting. E.g. `de.De` not. If already set, it should show a button that allows to remove the setting again.
+    - [ ] Also, you should see an input field that allows to enter additional collabora options. E.g. `net.content_security_policy=false` should not be accepted, but `--o:net.content_security_policy="frame-ancestors *.example.com:*;"` should.
 
 You can now continue with [060-environmental-variables.md](./060-environmental-variables.md)